Quick start

Connect your Dahua camera

For Dahua cameras with the Web 3.0 interface

The camera takes a photo every 10 minutes and uploads it by FTP to TimelapseRobot.

You’ll need

  • The camera, powered by its 12 V power supply or by PoE, and connected by network cable to the same local network as your computer.
  • A computer with a web browser (tested with Chrome, Edge and Firefox).
  • The FTP details of your camera from TimelapseRobot: server, port, username and password.

Where are you starting from?

New camera: find it and give it a password

A new Dahua camera has no password and the fixed address 192.168.1.108, which your network usually cannot reach. The Dahua ConfigTool fixes both (tested on Windows).

  1. Open ConfigTool. Your camera appears in the list with the status Uninitialized.
    Dahua ConfigTool with the new camera in the list
    A new camera shows up as Uninitialized. MAC address blacked out.
  2. Select the camera and click Initialize. Set a strong admin password and write it down.
  3. The next page offers Easy4ip and Auto-check for updates. Neither is needed for TimelapseRobot. Click OK, then Finish. The status is now Initialized.
  4. Click Search Setting at the top right. Enter the password you just set under Password and click OK. The username stays admin.
    Dahua ConfigTool, Search Setting window
    Search Setting: username admin and the new password, then OK. Password blacked out.
  5. Click Edit in the camera’s row. In the Modify IP Address window, set Mode to DHCP and click OK.
    Dahua ConfigTool, Modify IP Address window
    Mode DHCP, then OK.
  6. Unplug the camera’s power for a few seconds and plug it back in.
  7. After about a minute, refresh the list. The camera now has an address from your network. In our test it switched to 10.0.0.144 (yours will be a similar address).
  8. Click Web in the camera’s row. The login page opens. Log in with the username admin and your password.
Verified in testing

Without the power cycle in step 6, the camera fell back to its old address after a few minutes. Only the restart gave it a stable address.

Log in to the camera

Type the camera’s IP address into your web browser’s address bar and log in, if you are not already.

This guide shows the Web 3.0 interface: under SettingInformationVersion, the WEB Version starts with V3. The interface is in English by default. With other versions, menus may look different.

Camera web interface, Information, Version page
WEB Version starts with V3. Serial number blacked out.

1

Clock

Click Setting at the top and follow the menu on the left.

Menu path
SettingSystemGeneralDate&Time
Field in the interfaceValue
Time Zoneyour time zone, for Austria (UTC+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna
Only if it applies to your region. The example given is for Vienna, Austria.
DST (Daylight Saving Time)on, DST Type Week
Start TimeMar LastWeek Sun 02:00:00
End TimeOct LastWeek Sun 03:00:00
NTPon, keep the preset server and port

Click Save and confirm the question about NTP with OK. Then click Refresh and check that the time zone and the time are correct.

Camera web interface, System, General, Date&Time page
Time zone, daylight saving time and NTP after Save and Refresh.
2

A photo every 10 minutes

Menu path
SettingCameraVideoSnapshot
Field in the interfaceValue
Snapshot TypeGeneral
Quality6(Best)
IntervalCustomized, then 600 (seconds)

Click Save.

Camera web interface, Camera, Video, Snapshot tab
General, quality 6(Best), interval 600 seconds.
3

Photos around the clock

Menu path
SettingStorageScheduleSnapshot
  1. Click Setting in any row.
  2. Tick All.
  3. In Period1 (00:00:00 to 23:59:59), tick General.
  4. Click Save in the window, then Save on the page.

All days must show a green bar! Remember to click Save and test with Refresh. Without General, the camera takes no timed photos.

Camera web interface, Storage, Schedule, Snapshot tab
Every day shows the green General bar from 0 to 24.
4

Switch off motion detection

Menu path
SettingEventVideo DetectionMotion Detection

Untick Enable and click Save. Otherwise a person in front of the camera triggers extra photos, which are uploaded as well. Smart Motion Detection switches off with it.

Camera web interface, Event, Video Detection, Motion Detection tab
Enable unticked, then Save.
5

Send timed photos to FTP

Menu path
SettingStorageDestinationPath

In the Snapshot table, tick FTP in the General column. In the Event and Alarm columns, tick neither Local nor FTP. Click Save, then Refresh and check the ticks.

Camera web interface, Storage, Destination, Path tab
Snapshot table: FTP ticked under General only.
6

FTP connection

Menu path
SettingStorageDestinationFTP
Field in the interfaceValue
Enableon
Type (selection without label)FTP, not SFTP(Recommended). The port changes to 21.
Server Addressftp.timelapserobot.com
Port21
Usernameyour FTP username from TimelapseRobot
PasswordType the password by hand, then click Save right away. Pasting does not work.your FTP password from TimelapseRobot, typed by hand
Remote Directoryempty. Delete the preset share.
Camera web interface, Storage, Destination, FTP tab
FTP, server and port 21, Remote Directory empty. Username and password blacked out.
Caution

The test button may report FTP server test failure, file deletion right loss. This does not mean the connection failed: TimelapseRobot does not allow the camera to delete files. The real proof is the first photo in TimelapseRobot.

7

Check in TimelapseRobot

Within 10 minutes the first photo appears in TimelapseRobot.

Caution

If no photo arrives within the time you set, check that the FTP password was typed in by hand correctly and saved immediately afterwards (step 6). This is the most common issue at this point.

  1. Open your camera in TimelapseRobot. It reads date and time from the camera’s default file names, so there is nothing to change on the camera.
  2. Set Detected Timezone to your own time zone, for example Europe/Vienna, and save. The automatic guess may pick a zone without daylight saving time, and summer photos would then be one hour off.
Tip

For photos without date and camera name burned in, open SettingCameraVideoOverlay and set Channel Title and Time Title to Disable, each with Save.

If something does not work

SymptomPossible causeRemedy
No photos arrivePassword pasted instead of typed, wrong FTP details, SFTP selected, General missing in the schedule or FTP not ticked under PathCheck steps 3, 5 and 6. Type the FTP password by hand and click Save right away.
Extra photos at odd timesMotion detection is still onRepeat step 4.
Photos are one hour offTime zone or DST wrong in the camera or in TimelapseRobotCheck step 1 and the time zone in TimelapseRobot.